Cranes, excavators, loaders, and any other large equipment you might find on a construction site are considered construction equipment. While some of you might see construction equipment as hammers, saws, and other smaller items they are in fact construction tools. Are you looking for some construction equipment to help you with your next job? If so you need to know a little bit about the equipment available.

Cranes: You can have many types of canes from the all terrain hydraulic crane, to the boom truck. A boom truck is a piece of construction equipment that has a flat bed with a crane on it rather than a smaller cab for the crane with tracks. This crane system can be used to haul the material as well as move the crane about while hydraulic cranes tend to need a trailer and then roll off to be placed on the ground. These types of cranes tend to rotate 360 degrees.

Excavators: These are consider bobcats, and backhoes of the construction equipment. The size you will need is again dependent upon the job you will have. Most construction companies have a variety for the type of work and land they will have. Bobcats usually work out well when you have a little job, where as backhoes are great for digging larger holes.

Loaders: The are also many types of loaders from a front end loader to a wheel loader. Loaders are often seen used for road construction as well as other construction jobs. These are tractors that have a bucket on the front and use a hydraulic system to raise the bucket and dump the material either in a dump truck or off to the side.

Construction equipment is important whether you work on housing sites or road construction. The equipment you choose will depend on the type of work you do and will also be determined by the terrain you work on.

Posted by admin | No Comments »

Portable compressors are nice to have for various home and professional projects.You will want to keep in mind that portable compressors come in many sizes and power levels. You will find that there are a few types that you can use, but it mostly depends on the tools that you use. You will want to check the requirements of your tools, before you go and purchase the portable compressor. You will find that there are some tools that require a higher amount of power or pressure. You will always want to go a little bit more on the power than you think you need, so that you can protect your tools.

You will also find that there are some safety precautions that you will want to follow to keep yourself safe. You will need to do things like wear the safety goggles and protective clothing. You will want to keep in mind that the safety goggles are needed to protect yourself from anything flying into your eye. As for the clothing you will need to wear long sleeves and long pants to protect your body. Also, consider your footwear. You will need to have the work boots are steel toe boots so that you can protect yourself from any foot injuries.

As for the types of portable compressors, you will find that there are a few. You can get some for the lighter jobs and you can also get compressors that will help you out with the heavy-duty jobs. There are some compressors like truck-mounted compressors and deck mounted compressors that will help you to go from site to site and still have the power needed. As for the truck mounted compressors, there are mounted in the bed or under the hood. The ones that are mounted under the hoods are a great way to save space. They will use the engine of your trust for the power, so it is also low maintenance. The only downside is that you will need to have the truck running to have power for the compressor. This is a great way for you to power compressors for small jobs. The deck-mounted compressors will only mount to the bed of the truck, however, you can take them out and leave them at the job. They have their own engines and such, so the truck’s power is not needed. Many are electronically powered, however, some do run on gasoline.

As for the brands you will want to consider buying an air compressor known as Quincy and Husky. They both are excellent and you can trust them to give you the quality that you need. You will want to make sure that you consider some of the ways that you will need an air compressor and then figure out what your budget is. Then you will be able to make a good decision about the compressor that you purchase.

Posted by admin | No Comments »

Forestry and agricultural equipment financing is essential to buy land clearing equipments, mill equipments and other equipments. Agriculture and forestry largely depends upon heavy equipments in order to accomplish the related tasks easily. These equipments are generally expensive and hence require forestry and agricultural equipment financing.Equipment purchasing is a normal practice in the field of agriculture and forestry since these equipments ensure completing the tasks without any interruptions. For instance, cutting the tree efficiently is impossible without the truck. Similarly it is obvious to use a tractor in the farm work. Therefore forestry and agricultural equipment financing is required to buy the essential equipments.

There are varieties of loan options provided by some reliable financing companies. The forestry and agricultural equipment financing is categorized as farm equipment financing, landscape equipment financing and other agricultural equipment financing.Farm equipments vary from farm to farm according to the size and type of the farm. For instance equipments used in dairy farm may not be useful in a grain farm. There are various types of farm equipments which are useful in harvesting, threshing and cleaning the grains. Similarly there are equipments like Hay bailer which is used to compress grains in round or rectangular bales. These equipments are quit expensive and so forestry and agricultural equipment financing is required to get such equipments. Some legitimate financing companies offer low interest rate financial assistance for these purposes.

Tractors, power tiller, Ploughing equipment, planting equipments are often essential in agricultural field. Agricultural farms are using mechanized equipments nowadays for accomplishing the farm works faster and deeper. Since these equipments are indispensable for modern agriculture. The genuine financing companies would help you get such forestry and agricultural equipment financing that lets you buy all the necessary for your farm.

Landscape companies require large mowers and other equipments like edging equipment, mulching equipment, turf maintenance equipment, irrigation system like sprinkler system, drip system and so on. These equipments are vitally important for smooth operation of landscape companies. However these equipments represent a costly investment. There would be difficulty in getting financial assistance from some financing companies. Yet there are some good financing companies which can provide you financial help at lower interest rate to buy the essential landscape equipments. There would be embarrassing procedures and delayed responses. You can get the forestry and agricultural equipment financing immediately after applying for the loan provided you have the minimum qualifications to obtain the loan.

Apart from the normal agricultural and forestry equipments, there is some equipment that is in special in nature. These equipments help in improving agricultural and forestry field. For instance, automated milking machines help speeding up the milking process. However these equipments are not cheap and so they would not be used by an average farmer. But Forestry and agricultural equipment financing helps those people to buy the necessary equipments that help them provide steady improvements in their farm works.There are yet some special types of equipment like food processing equipment, dairy machinery equipment and so on. You can get financial help from reliable companies by simply filling the online application form provided by such companies.

Posted by admin | No Comments »

In today’s unstable economy, the startup and seasoned business has an unique opportunity to acquire an attractive deal for off leases and repos for commercial trucks and construction equipment. Due to a contracting economy, many lenders have excess inventories on their books that they need to put back on the street. These in-house inventories are non income producing, therefore putting pressure on the lender to make a deal with the consumer. These deals can be found in the price, the financing or a combination of both.

An off lease commercial vehicle and/or construction equipment has been returned to the lender as the lease has expired. The lessee has made a decision to return the item in lieu of exercising the buyout option. A repo has arisen due to a default of the lessee for non payment terms or a violation of the terms of the lease. Either way, the lender has taken these trucks and/or equipment back and now must recondition the items and either sell these items or re-lease them. The lender will either advertise their inventory through their internal sales force or outside professionals such as brokers to move their inventories as quick as possible. Sometimes as these inventories either sit or whatever reason aren’t moving, the lender may put these items up for auction.

For this article, the type of items we are going to identify as potential off lease and repo deals are the following:

Dump trucks, flatbed trucks, grapple and landscape trucks, fuel and lube trucks, bucket and boom trucks, over the road and day cabs, water trucks, tow trucks, box vans and straight trucks, dry van and reefer trailers, end and bottom dump trailers, flatbed trailers, backhoes, bulldozers, crawler tractors, forestry equipment, excavators, forklifts, and other type loaders.

Some of the ways the startup and/or seasoned business can locate these deals are through trade publications, surfing internet search engines, contacting lease brokers for information and speaking to lenders directly.

Some of the lenders in the market have advertised personal credit qualifications as low as 575, prior bankruptcy rules amended or ignored and startups welcome. Additionally, the front money to commence the lease can start as low as first payment to whatever you might able to negotiate.

In conclusion, this is a buyers market for commercial trucks, trailers, and construction equipment. Check out all the deals in the market and make sure that you have a stable income base to assume whatever debt that you may occur. Happy hunting for your acquisition and related financing.

Posted by admin | No Comments »

Skid steer loaders are machines used in different types of construction sites, and are applicable especially in tight spaces because they are small and easy maneuverable.They are equipped with wheels and can turn in their own tracks, making them extremely valuable for applications that require a compact, agile loader. They have light weight and so, they can be towed behind a pickup truck.The skid steel loader has four wheels and its characteristic is that the left-side drive wheels are independent of the right-side drive wheels. This way, wheel speed and direction of rotation of the wheels will determine the direction the machine will turn.

The skid steel loaders have a simple operating system. Inside the cabin there are two joysticks: a left hand joystick and a right hand joystick. The left hand one is made for controlling the direction. The right hand one is for controlling the loader arms and bucket. By pulling the joystick back, the arms of the machine will raise; by pushing the joystick forward, the arms will be lowered. In order to tilt the bucket up the joystick must be moved to the left. By moving it to the right the bucket will dump. All the system is powered by hydraulic pumps, meaning that there is no mechanical transmission.

The Skid steel loader is suitable for digging and moving landscaping and other building materials. Due to its numerous tools it can also grade, jackhammer cement and load trucks. Some of the special tools of the skid steer loaders are: a dirt bucket, utility grapple bucket, pallet forks, utility fork, angle blade, auger, broom, cold planer, hydraulic hammer, landscape rake and tillers, material handling arm, stump grinder trencher and a vibratory compactor. These tools make skid steel loaders quite useful because there will not be necessary 10 machines any more to complete all these functions.

Another useful machine in the construction field is the backhoes. They are generally used for many different jobs and can replace many other types of heavy equipment at the construction site.They are designed in a unique way; they have tools sticking out from every way of the machine. The backhoes can be considered to have three pieces of construction equipment combined into one unit: a tractor, a loader and a classical backhoe. Because the backhoes can use all these three functions at a construction site they are considered to be quite valuable and replace other machines.

The backhoe’s core structure is the tractor. Its design allows the machine to move easily over different type of rough terrain. It is equipped with a turbocharged diesel engine, with tires and a cabin for the pilot.The loader is another part of the backhoe. It is attached in the front, while the backhoe is situated in the back. The loader is used as a spoon that picks up and carries a lot of loose material. It can also be used for smoothing things over, or for pushing dirt.

The backhoe loader also has a backhoe in the back of the tractor. Its function is to dig earth, or to lift heavy loads and then drop them in a pile at the side of the hole. All kinds of holes can be digged with a backhoe but most of all is suitable for ditches. In order not to fall inside the hole, the backhoes are equipped with stabilizer legs.The backhoes are used mostly for digging ditches with the backhoe, and then for carrying out the dirt with the loader. After the work is done in that are, the loader will fill back the ditch with the extracted dirt.

These machines, the skid steer loader and the backhoe are very useful nowadays because they are very efficient and they save a lot of time because the operator doesn’t have to switch between two different pieces of equipment any more.

Posted by admin | No Comments »

Sometimes called a forklift truck, the forklift is a powerful industrial truck that is used to lift and transport material by steel forks that are inserted under the load. Forklifts are commonly used to move loads and equipment that is stored on pallets. The forklift was developed in 1920, and has since become a valuable piece of equipment in many manufacturing and warehousing operations.

Types : The most common type of design with forklifts is the counter balance. Other types of designs include the reach truck and side loader, both of which are used in environments where the space is at a minimum.

Control and capability : Forklifts are available in many types and different load capacities. In the average warehouse setting, most forklifts have load capacities of around five tons. Along with the control to raise and lower the forks, you can also tilt the mast to compensate for the tendency of the load to angle the blades towards the ground and risk slipping it off the forks. The tilt will also provide a limited ability to operate on ground that isn’t level. There are some variations that allow you to move the forks and backrest laterally, which allows easier placement of a load. In addition to this, there are some machines that offer hydraulic control to move the forks together or further apart, which removes the need for you to get out of the cab to manually adjust for a different size load.

nother forklift variation that is sometimes used in manufacturing facilities, will utilize forklifts with a clamp attachment that you can open and close around a load, instead of having to use forks. Products such as boxes, cartons, etc., can be moved with the clamp attachment.

Safety : Forklifts are rated for loads at a specified maximum weight and a specified forward type center of gravity. All of this information is located on a nameplate that is provided by the manufacturer and the loads cannot exceed these specifications. One of the most important aspects of operating a forklift is the rear wheel steering. Even though this helps to increase maneuverability in tight cornering situations, it differs from the traditional experience of a driver with other wheeled vehicles as there is no caster action. Another critical aspect of the forklift is the instability. Both the forklift and the load must be considered a unit, with a varying center of gravity with every movement of the load. You must never negotiate a turn with a forklift at full speed with a raised load, as this can easily tip the forklift over.

Normally, to drive a forklift, you’ll need to pass a basic test. They aren’t difficult to operate, although you’ll need to be safe when you operate them. Once you have operated one for a while, you’ll have no problems being safe.

Posted by admin | No Comments »

The theft of construction equipment is big business for criminals that have access to international shipping. In the past year law enforcement officials have found large dump trucks completely buried in South Florida by thieves who were waiting for their ship to make a port of call at Miami. In one case a check of serial numbers found that all the equipment being used by a construction company was in fact stolen. Whenever the company needed a piece of equipment they would just drive up to a nearby construction site and load it up and truck it away.

The cost of insuring construction equipment has steadily risen as a result of equipment losses. Some companies are fighting back through the use of GPS auto tracker technology. GPS tracking devices are becoming smaller and smaller allowing them to be hidden. Unlike the Lojack system that uses short range radio signals to help police locate stolen equipment, GPS tracking devices can be located in just about any location with a clear view of the sky and many cases inside building.

If you have equipment at multiple worksites and need to manage your equipment resources then GPS auto tracking technology will help you. New GPS tracking units will not only give the location of each piece of equipment but also tell you when it is being used and for how long. You can also monitor the status major mechanical systems as well. A simple check of your data base will tell you how many hours you have on each unit thereby assuring that proper maintenance is scheduled and completed. All of which will protect your valuable investment.

Real time GPS tracking is accomplished through the use of a GPS tracking device that is attached to your equipment in a hidden location. Information from this device is then uploaded to a GPS tracking service provider either by cell phone or satellite phone systems. The service company then provides your company with the tracking information that is displayed on your company computers.

In the advent that you lose track of a piece to equipment you can immediately located it. In addition you can apply geo fencing features that will send an alarm to you and law enforcement when your equipment leaves its assigned area. You can quickly stop the loss of your equipment and also the loss of income due to equipment downtime due to the loss. Finding a replacement for a key piece of equipment will take time and time is something that you cannot replace.

Protect your valuable equipment resources through the use of GPS auto tracker technology. You may find that your insurance company will be able to give you significant discounts when you use GPS tracking technology to protect your valuable equipment. You will not only save money but also peace of mind knowing your have control of your construction equipment 24 hours a day.

Posted by admin | No Comments »

Many companies and contractors in need of acquiring new or used construction equipment often don’t have the financial resources needed to buy the construction equipment outright, unless it is a large corporation or some branch of the government. This is when the option of renting or leasing construction equipment comes into play. Deciding to rent or lease often depends on what the contractor or business manager feels most comfortable doing from a financial perspective after evaluating the many possibilities and deciding what suits their need from long term leasing to short term renting. The side of construction equipment rentals has met a positive growth since 2004, where nearly 50% of construction equipments dealers‘ are offering heavy equipment rentals as part of their operation.

There are two ways most companies acquire their construction equipment, renting or leasing. Many contractors or business managers viewed renting or leasing as an opportunity to test out construction equipment at no extra cost and with no strings attached with the possibility of buying. Most often the rental would be converted into a purchase to avoid losing the invested equity. Most buyers would also take into account whether their business is flourishing or floundering, before committing to buying any construction equipment. In a case where a business has an uncertain future, the potential buyers may deem renting as the best way economically and then return the construction equipment to its owner when the job is done.

The Association of Equipment Manufacturers (AEM) is the international trade and business development resource for companies that manufacture equipment, products and services used worldwide in the construction, agricultural, mining, forestry, and utility fields. The AEM has conducted a survey that predicted that in the near future, more construction equipment buyers will turn to the Internet for product purchases; as construction equipment buyers increasingly turn to the Internet for transactions, information and support.

Consequently, the rise of on-line auctions, sales, renting and leasing are made available by a variety of merchants who cater to the needs of companies and contractors worldwide. On-line merchants such as: Machine Mart, Rock & Dirt, Machinery Trader, Iron Planet, Contractors Hotline, etc. are only a few of the leading markets where companies and contractors alike can find nearly every piece of construction equipment they are looking for, from the top manufacturers such as Caterpillar and John Deere to many more. Many of these merchants offer the options of buying, selling, renting and leasing of new and used construction equipments to parts service and repair and machine maintenance. It’s always wise to investigate the background of any merchant before you place a bid or purchase any construction equipment, to ensure a good reputable stand point before entering into a contract with any dealer or merchant. It’s always wise to shop around and compare deals on construction equipment to other offers before committing to any deal.

Posted by admin | No Comments »

The business owner has to consider two options when it comes to buying construction equipment. First of all there are primarily two paths to getting the construction equipment needed. Buying the equipment outright or leasing it. Both have advantages and drawbacks.

Business Loans Can Help Buy Needed Construction Equipment

Bulldozers, backhoes, and other digging equipment are some of the equipment necessary for starting a construction business is very expensive. Buying the equipment outright can be very cost prohibitive for the business start-up, but a business loan can level the playing field. If the construction equipment is maintained properly, it will last years past what a lease payment offers.

Business owners also like the fact that once the business loan is paid off they own the equipment outright. This helps the business build accrued equity. The equity can be used later in time to help secure working capital if the need arises. This will most likely not be necessary since a good unsecured lines of credit can provide all the extra working capital they need in most cases. In terms of taxes, equipment that is owned can be counted on taxes as depreciation.

The Benefits of a Leasing Construction Equipment

Tax benefits of leasing equipment is one of the top benefits to the business owner. The IRS has made leasing 100% deductible and many business owners love this aspect of leasing equipment. The type of lease that gives this benefit is what is called a “true lease.” If you do not know what we mean by a true lease, the Internal Revenue Service uses the term true lease to define how a lease is structured.

To qualify for “true lease” status, the construction equipments must be declared at fault fair market value when the leases end. This all this sounds complicated, but it really isn’t. If you have questions it is good to consult with a professional tax consultant to help you figure out your best options.The leasing company will often give an option to buy the equipment following the terms of the lease. Another benefit to leasing, is that business owners an often enter a lease agreement without a down payment. This is great for start-up businesses that do not have a lot of cash on hand.

A Final Thought on Leasing Equipment verses Buying

When considering leasing verses buying equipment, it is important to consider the future and the long term effects to your business. Look at both sides of the coin, and determine the best route for your business.

Posted by admin | No Comments »